top-title

30KG Linear Vibration Welder

30KG Linear Vibration Welder

MVS-615LS linear vibration welder applies one pair of electronic magnetic core to drive four vibration springs to generate linear vibration finishing welding, achieves power output max to 15KW. It can be loaded in upper jig weight max to 30KG. Machine applies servo hydraulic system to force elevating table and to clamp parts during operation with 15.5N force. The system is with advantages of high control precision, stable performance and lower noise.
Technical description

Vibration welder MSV-630LS is a linear vibration friction welding machine in medium specification for thermoplastic joining e, it can be applied for the most range of plastic welding which is over than ultrasonic plastic welding ability. Vibration welding can be applied for almost all types of thermoplastic. Comparing hot plate welding, vibration welding is with advantages of higher welding ability, higher effectiveness and lower power consumption. 

MVS-615LS linear vibration welder applies one pair of electronic magnetic core to drive four vibration springs to generate linear vibration finishing welding, achieves power output max to 15KW. It can be loaded in upper jig weight max to 30KGMachine applies servo hydraulic system to force elevating table and to clamp parts during operation with 15.5N force. The system is with advantages of high control precision, stable performance and lower noise.

MSV-615 is mostly used for the assembly the parts for house-held appliance and vehicle, such as tolid seat ring, tank of washing machine, tail lamp of car, glove box lid of vehicle, etc.

Before conclude the machine specification, it suggest you send us 3D of plastic parts to be welded for weld possibility analysis for you.

I. Main Features:
1. Auto frequency tuning: machine finishes resonance tuning after loading vibration welding tooling;
2. Welding process 8 steps: machine control vibration process in stages during operation in precision for perfect plastic welding basing on actual welding operation requirement;
3. Double welding modes: Machine has welding control in time and depth mode for operators' choice achieves different performance, achieving the best welding result;
4. Parameter storage: it can input 80 sets of welding parameter ans save in storage, so it just need to recall the related welding parameters after tooling changing-over with no need set parameters one by one;
5. QC management: Machine judges welding result basing on the analysis the actual welding parameter together with set parameters, helping quality management;
6. Internet connection: this function is available for some model basing customers' requirement, help remote diagnosis to machine error or SPC control;
7. Printing function: printer connect port can be applied on machine basing on customers' requirement.

II. Optional Features:
1. Infrared Preheating system for clear vibration thermoplastic joining process;
2. HF vibration system for clean vibration welding;
3. Internet connection;
4. Printer port.

III. Specification:
1. Model: MSV-630LS
2. Upper tool Weight: 15~30kg
3. Welding area(approx. for PP): 200cm2
4. Amplitude(peak to peak): 0.5~1.8mm
5. Frequency ( without Fixture ): 200~260 Hz
6. Machine Dimension: 2454*1240*2240
7. Front Door Opening: 1400*790(mm)
8. Drive Platen/upper : 860*440(mm)
9. Lift Table Size: 1300*600(mm)
10. Table stroke: Max. 500 mm
11. Max. distance between lift table&Vibration Head: 735mm
12. Table Elevating Speed: 250mm/s
13. Clamp Force: 15kN
14. Hydraulic System: Servo Pump
15. Hydraulic oil: ISOVG32
16. Weight: about 3000kg
17. Sound pressure level: <85dB
18. Main voltage(3P)/In put: AC220V/50,60Hz / AC380V ,440V
19. Power consumption: 23KVA
20. Maximum Power/Out Put: 15Kw
21. Control Voltage: DC 24V
22. Frequency Tuning: Auto/Manual
23. Auto Tuning: about 4Sec.
24. Welding Control: Depth/Time
25. Step for Welding: 8Stages
26.Set up number: 80ea
27. Welding Result Analysis: Good/Bad
28. Language: English/Chinese/Korean
29. Communication: RS232C,422